Dark Light
-28%

Tpa3116 2.1 sub amp module

Availability:

6 in stock


2.1-channel Class-D amplifier board built on the Texas Instruments TPA3116D2 chip. It drives a stereo pair of speakers plus a subwoofer from a single DC supply, so it suits DIY home-theatre, PC and car-audio builds.

Rs.2,750.00 Rs.3,800.00

6 in stock

This 2.1 amplifier module is built on the TPA3116D2 Class-D amplifier IC from Texas Instruments. It has left and right speaker outputs plus a dedicated subwoofer (bass) channel, so one board and one DC power supply can run a full 2.1 speaker system. Class-D efficiency keeps heat low compared with traditional linear amplifiers.

Chip specifications (from the TI TPA3116D2 datasheet):

  • Stereo output: up to 2 × 50 W into 4 Ω at 21 V supply (chip rating)
  • Mono (bridged) mode: up to 100 W into 2 Ω (chip rating, used for subwoofer channels)
  • Supply voltage range: 4.5 V to 26 V DC (single supply)
  • Efficiency: over 90%
  • Protection: over-voltage, under-voltage, over-temperature, DC-detect and short-circuit protection
  • Inputs: supports differential and single-ended analog inputs

These figures are the chip’s maximum ratings. The real output of the module depends on your supply voltage and current, your speaker impedance and the board’s cooling. Use a regulated DC supply of adequate current, do not exceed 26 V, and observe polarity.

Typical uses:

  • DIY 2.1 speaker systems and home-theatre builds
  • Repairing or upgrading 2.1 PC / multimedia speaker systems
  • Adding a subwoofer to a TV, PC or Bluetooth audio setup
  • 12 V car or battery-powered audio projects
Category: Tags: , ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Tpa3116 2.1 sub amp module”

There are no reviews yet.